VP Series
ADVANTAGES to the VP Series:
- Specially designed to withstand highly abrasive and/or caustic liquids
- High-strength glass-filled thermoplastic construction provides a cost-effective alternative to brass or stainless steel
- Permanently lubricated sealed ball bearing motors with guards in pump column to protect motor from splashing and vapors
- Labyrinth chamber above the volute eliminates splashing at low liquid levels
- Celcon, a tough glass-filled thermoplastic combining high mechanical strength, stiffness and stability through a broad range of temperatures, is used in all VP Series pumps and impellers.
- Can be combined with tanks to provide a complete, ready-to-install pumping system
Click HERE for our Build-A-System Brochure!
Specifications
Most pumps are available as pump/tank combinations.
All Models: 5/8" O.D. slip-on vertical discharge.
VP30: 1/15 HP, 3000 RPM, fan cooled, overload protection. Maximum viscosity: 250 SSU.
VP40: Similar to VP30, but larger impeller delivers higher flow rate. Maximum viscosity: 250 SSU.
VP50: 1/8 HP, 3450 RPM electric or 1/4HP air motor. Maximum viscosity: 400 SSU.
Materials:
Pump Body, Volute and Impeller: Celcon
Shaft: VPM models, 316 stainless steel
Construction Features
Order Information
|
VP Series Models |
|||
|
“B” Length |
Model |
HP |
Voltage |
|
5” |
VPM35 |
1/15 |
E |
|
8” |
VPM38 |
1/15 |
E |
|
10” |
VPM310 |
1/15 |
E |
|
5” |
VPM45 |
1/15 |
E |
|
8” |
VPM48 |
1/15 |
E |
|
10” |
VPM410 |
1/15 |
E |
|
5” |
VPM55 |
1/8 |
A, B, F, GAM |
|
8” |
VPM58 |
1/8 |
A, B, F, GAM |
|
10” |
VPM510 |
1/8 |
A, B, F, GAM |
|
VOLTAGE SUFFIX CHART |
||||||
|
Suffix |
A |
B |
E |
F |
Z |
GAM(C) |
|
Voltage |
115 |
230 |
115/230 |
230/460 |
575 |
AIR |
|
Hertz |
50/60 |
50/60 |
50/60 |
50/60 |
60 |
AIR |
|
Phase |
1 |
1 |
1 |
3 |
3 |
AIR |
Performance
VP Series Models
1. VP50 Series – 1/8 HP – WATER
2. VP40 Series – 1/15 HP – WATER
3. VP30 Series – 1/15 HP – WATER
4. VP20 Series - DISCONTINUED
