Products
Pumps
Centrifugal Ink Pumps
Diaphragm Ink Pump
Peristaltic Ink Pump
Transfer/Drum Ink Pumps
Filters
Filters
megaMag
Surge Suppressors
Viscosity
Replacement Parts
Accessories
|
 Centrifugal Ink Pumps
This industry workhorse is low maintenance, takes a lot of abuse, and delivers
ink in a non-pulsating flow. Graymills models provide in-tank agitation to keep the material
in the container blended. Flow is easily controlled by the use of valves. Available in air or
electric with quick demountable motor coupler. |
|
|
|
| |
H2000 Ink Pump |
Narrow web, tape, tag, label,envelope and smaller specialty presses. |
| |
| |
H2000H Ink Pump |
Lifting heavier viscosity inks (above 35 sec., No. 2 Zahn) to higher print decks (over 8') and into chambered doctor blade systems requires more pressure. The H2000H Series delivers the necessary pressure and flow for top performance. Use for mid webs and |
| |
| |
H3000 Ink Pump |
Wide webs up to 60 inches. Viscosities up to 35 sec., No. 2 Zahn. |
| |
| |
M3 Ink Pump |
For wide web applications, especially those requiring higher viscosities and/or higher print decks. |
| |
| |
H4000 Ink Pump |
Webs over 60 inches wide and gravure. Viscosities up to 40 sec., No. 2 Zahn. For viscosities exceeding 40 sec. use either the 3/4 HP electric or #4 air motor. |
| |
| |
HR Ink Pump |
For larger narrow web and envelope presses. Viscosities up to 30 sec., No. 2 Zahn. |
| |
| |
HV Ink Pump |
For small presses requires flow rate of 1 GPM or less. Viscosities up to 30 sec., No. 2 Zahn |
| |
|
|
|
|